D6000R Swing Gate (Roger Technology SMARTY Automation)
D6000R Swing Gate (Roger Technology SMARTY Automation) designed for versatile access control across commercial and industrial sites, the D6000R swing gate combines robust, fully welded steel construction with advanced automation—delivering a reliable, high-performance solution for a wide range of applications.
Manufactured from fully welded mild steel, the D6000R is available in both single and double leaf configurations, with sizes up to 8.0m max (4.0m single leaf) and 3.0m height – providing the flexibility to suit everything from standard access points to wider vehicle entrances.
D6000R Swing Gate (Roger Technology SMARTY Automation)
MAXIMUM SPAN
8.0m Max ( 4.0m Single leaf )
3.0 Max ( depending in Span and Infill )
Drives
Rogers Smarty rams
Lower and Vertical Cat 3 safety edges, Dual height photocells, Flashing beacon/Sounder
Locking
500kg Maglock
Hinges
Bearing load hinges
Finish
Primed and Polyester Powdercoated in a STD RAL colour
D6000R Swing Gate (Roger Technology SMARTY Automation) Features
GATE DRIVE
The D6000R gates utilise Smarty Roger rams powered by advanced 36V brushless motor technology, ensuring superior performance, durability, and suitability for high-intensity domestic and commercial applications.
The D6000R is equipped with precision-engineered bearing hinges rated for loads of up to 3,000 kg, delivering enhanced structural support, reduced frictional wear, and consistent long-term operational reliability.
HD GATE HINGES
SINGLE LEAF OPTION
The D6000R is available in both single-leaf and double-leaf configurations, with single-leaf gates spanning openings up to 4,000 mm and double-leaf arrangements covering openings up to 8,000 mm, with gate heights available up to 3,000 mm. As standard, the system is supplied with dedicated closing arrangements and a 500 kg-rated magnetic lock to provide secure and reliable closure, along with dual photocells mounted to the gate posts for safety coverage and obstacle detection during operation.
SAFETY SYSTEMS
GATE INFILL OPTIONS
A wide range of gate infill options is available to meet security and design requirements. Standard choices include vertical steel tubes, welded mesh, and palisade systems, with additional options such as composite boards and timber cladding.
Custom sheet steel panels can also be laser-cut with logos or branding, combining strong security with a distinctive visual identity.
Post Types
1. Standard Post (Subsurface Fixing)
The standard post is designed for installation with the base plate positioned 300 mm below Finished Floor Level (FFL). This configuration allows for initial mechanical fixing of the post, followed by installation of ducting and cable infrastructure. Finalbackfilling and consolidation can then be carried out once all services are in place and post alignment/levelling has been completed.
The offset post utilises the same installation depth of 300 mm below FFL, but incorporates an eccentrically positioned (offset) base plate. This design facilitates installation in restricted or boundary-adjacent locations, such as against brickwork or structural walls, where standard base plate positioning would be impractical.
2. Offset Post (Subsurface Fixing with Eccentric Base Plate)
3. Surface Mount Post (Above-Ground Fixing)
The surface mount post is designed for installation directly at FFL, eliminating the need for excavation and backfilling. This configuration enables rapid installation and is particularly suited to sites where subsurface works are not feasible or must be minimised.
Technical INFORMATION
D6000R Swing Gate (Roger Technology SMARTY Automation) GALLERY
