D6100 Swing Gates
Our pedestrian gate is produced in a wide variety of formats, from simple padlockable gates to fully DDA compliant automated pedestrian access points. Typical applications include fire escapes with push to exit hardware, DDA compliant gates along with simple site security gates. A range of infill options exist, from vertical bar, weldmesh, timber cladding or decorative steel designs.
Automated pedestrian gates are fitted with hydraulic rams or underground drives, and are fitted as standard with fully compliant safety systems. Manual gates are usually supplied with slip latches for padlocking, or magnetic locks.
Specification
Maximum Span:
2.0m
Maximum Height:
3.5m
Opening / Closing Times:
10 to 18 seconds depending upon operator type
Drives:
Hydraulic ram or underground motor and gearbox
Safety:
Cat 3 edges as standard with Dual Photocells and a flashing beacon / sounder.
Construction:
100mm x 100mm box section frame (posts)
50mm x 50mm box section (leaf)
Cycles:
High Intensity Use
Power Supply:
230VAC 50Hz 6 Amp
Posts:
100mm x 100mm (if separate)
Wrap Around Hinges
Our hinge solution minimises closing up of the gate leaf towards the gate post to mitigate against trapping hazards. As shown our integrated gate closer can also be specified, which is a neater solution that typical gas strut mechanisms.
Gate Infill
Vertical tube is standard although palisade, weldmesh and composite wood infills are also available.
Locks
Manually operated gates are supplied as standard with a slip latch for padlocking, but a magnetic lock and self closer can also be supplied. Alternatively a range of panic hardware can also be supplied.
